HIGH STRENGTH STRUCTURAL WASHER (HV)
Slices, round, for HV connections
DIN 6916
Finish: Self, Black, Bright Zinc, Hot Dip Galvanized
| Nominal size | for thread | d1 | d2 | h | c | e | weight kg/1000 pcs | |||||
| min.= nominal size | max. | max.=nominal size | min. | nominal size | max. | min. | min.= nominal size | max. | approx. | |||
| 13 | M12 | 13 | 13,27 | 24 | 23,48 | 3 | 3,3 | 2,7 | 1,6 | 1,9 | 0,5 | 7,03 |
| 17 | M16 | 17 | 17,27 | 30 | 29,48 | 4 | 4,3 | 3,7 | 1,6 | 1,9 | 1 | 14,6 |
| 21 | M20 | 21 | 21,33 | 37 | 36,38 | 4 | 4,3 | 3,7 | 2 | 2,5 | 1 | 19,6 |
| 23 | M22 | 23 | 23,33 | 39 | 38,38 | 4 | 4,3 | 3,7 | 2 | 2,5 | 1 | 24,3 |
| 25 | M24 | 25 | 25,33 | 44 | 43,38 | 4 | 4,3 | 3,7 | 2 | 2,5 | 1 | 30,6 |
| 28 | M27 | 28 | 28,52 | 50 | 49 | 5 | 5,6 | 4,4 | 2,5 | 3 | 1 | 50,2 |
| 31 | M30 | 31 | 31,62 | 56 | 54,8 | 5 | 5,6 | 4,4 | 2,5 | 3 | 1 | 63,2 |
| 37 | M36 | 37 | 37,62 | 66 | 64,8 | 6 | 6,6 | 5,4 | 3 | 3,5 | 1,5 | 115 |
Specification Requirements:
●DIN 6916 Dimensions and Workmanship: DIN 6916，EN 14399 Part 6
● Material and Mechanical Properties:
Carbon Steel quenched and tempered to 300-370 HV
(Approximate conversion 32-40 HRC)
● Available Finishes:
– Plain w/light protective oil.
– Hot Dip Galvanized (HDG).
– Dacromet
– Customized.
● Material Test Report:
DIN 6916 The MTR must have documented lot traceability, including full chemical and mechanical figures, to the specification(s) above.
DIN 6916 The data underneath records the necessary dimensional, chemical and actual qualities of Hardened and Structural Washers, DIN6916/EN14399 Part 6, in this buy request. On the off chance that the request got doesn’t meet these prerequisites, it might bring about a provider remedial activity demand, which could endanger your status as a supported seller. Except if in any case indicated, all referred to agreement norms should be clung to completely.